Beretta 1301 M-LOK Barrel Clamp For The GG&G 1301 Aluminum Mag Tube Cover

In stock


You are probably aware that there are many M-LOK products being manufactured that are not directly made by Magpul.  There is even a company that claims that the M-LOK products they are selling are manufactured by Magpul.  They are not.  So buyer beware!

The screws that are included that attach to the T-Nuts for installation are of varying lengths.  Even Magpul uses these two different screw sizes for most of their M-LOK products - 10-24 x 3/8" button head cap screw or 10-24 x 7/16" button head cap screw.

To assist in solving this issue GG&G is including qty. (4) 10-24 x 3/8" button head cap screws with nylon thread locker patch with the GG&G 590/590A1 and M-LOK configured barrel clamp.  This will allow you to use most Magpul manufactured M-LOK accessories, as well as other M-LOK products produced by other manufacturers.

Even with this proactive approach, please be aware that the web thickness of the screw hole on other manufacturers M-LOK accessories may negatively affect fitment.  It is important to note, the included screws however, work perfectly with GG&G manufactured M-LOK accessories.

If you are using a non GG&G M-LOK accessory, even when using the GG&G supplied screws, please check and make sure that as you tighten the screws into the T-Nut, supplied with your M-LOK product, that the screws do not bottom out or make contact with the bottom of the M-LOK pocket, prior to putting the firearm and accessory into service.

Check Out The Other American Made GG&G Beretta 1301 Accessories Here.  Not interested in an M-LOK Barrel Clamp for your 1301 and prefer our standard setup which includes a regular barrel clamp?  Find It HERE!  

Beretta 1301 M-LOK Barrel Clamp For The GG&G Aluminum Mag Tube Cover

Have you purchased one of our GG&G Replacement Magazine Tube Covers with the accompanying aluminum barrel clamp for your Beretta 1301 and been one of the many customers that wished the barrel clamp had an M-LOK slot?  If so, we heard you loud and clear! Thanks to your input, WE MADE IT HAPPEN!  This new aluminum GG&G M-LOK Barrel Clamp is designed to fit the GG&G Aluminum Replacement Magazine Tube Cover. It may fit others, but we can't make that claim.   

Many customers called us indicating they would prefer having a durable, aluminum M-LOK barrel clamp for the Beretta 1301, versus the factory provided plastic barrel clamp, (even over one made of thermo-plastic).  Some shooters prefer mounting a sling attachment or other accessory at this far forward position. Customers have indicated the factory plastic barrel clamp has cracked as they attempted to tighten it to prevent it from sliding to the rear when the barrel heated up and there was tension on the sling mounted to the barrel clamp, or moving forward due to recoil. To top it off, we understood that replacement plastic barrel clamps were, at one time, hard to come by if you broke yours.

With the popularity among shooters using M-LOK accessories, the GG&G design team considered it important to offer an aluminum Beretta 1301 M-LOK Barrel Clamp For Our GG&G Manufactured Aluminum Magazine Tube Cover.  Again, it is designed to be used on our GG&G aluminum mag tube cover, which offers a high quality upgrade to the factory plastic mag tube cover. In addition, it has a recessed surface area that the GG&G M-LOK Barrel Clamp fits to reduce the possibility of movement. Get the tactical advantage to dominate the encounter - BE UNBEATABLE!

Check out the compatible GG&G M-LOK Tactical Accessories HERE!  Don't have your GG&G Aluminum Replacement Mag Tube Cover yet?  Get your package HERE with the replacement mag tube cover and M-LOK Barrel Clamp!

Beretta 1301 M-LOK Barrel Clamp For The GG&G Aluminum Mag Tube Cover Specifications:

  • Ergonomic design.
  • The two part design, with the use of counter pressure socket head cap screws, provides a solid installation. The wrench is included.
  • The GG&G Beretta M-LOK Barrel Clamp is CNC machined to fit Beretta 1301 shotguns equipped with the GG&G Aluminum Replacement Mag Tube Cover. Please be aware that because it makes contact with your barrel it may cause wear marks in the finish of the barrel or magazine tube. Consider applying protective tape to the fingers of the GG&G Beretta Barrel Clamp to mitigate this issue.
  • Perfect for mounting M-LOK Accessories to the GG&G Beretta 1301 aluminum replacement magazine tube cover.
  • Precision machined from 6061-T6 billet aluminum.
  • All edges are smoothed and rounded for the shooter's safety.
  • Finish: Type III Hard Coat Anodized in a non-reflective matte black finish per Mil-Spec.
  • Width At The Widest Area: 1.5 ".
  • Height: 2.25".
  • Weight: 2 oz.
  • Warranty: Lifetime.
  • Made In America By Men And Women Proud To Be Americans!
    Mossberg 500 Scope Mount. GG&G American Made Tactical Products

Free Shipping:
Google Base Product Name:
Beretta 1301 M-LOK Barrel Clamp For GG&G Aluminum Mag Tube Cover
New Product:
On Sale:
On Sale Free Ship: