Cart is empty
Mossberg 990 RMR Scope Mount
Mossberg 990 RMR Scope Mount
Please sign in so that we can notify you about a reply
IMPORTANT NOTICE! Although we include mounting screws for the Trijicon RMR, there are approximately 20 other Micro Red Dot Optics that fit the GG&G Mossberg 990 Red Dot Scope Mount. A fitment list is provided in the Specification section below.
Please be advised that the screws that are included with the GG&G Red Dot Mount are specific to mounting the RMR and may be too long for mounting other red dot optics. For example three Holosun Mini Red Dot Scopes, models 407, 507 and 508 have the same attachment screw layout as the Trijicon RMR. However, BE ADVISED: The screws that come with the GG&G Mossberg 990 RMR Mount ARE TOO LONG TO MOUNT THE HOLOSUN OPTICS! If you attempt to mount these Holosuns or any of the other optics listed below, you may dimple the top of the receiver!
Ensure you have the proper length screws prior to installing any other optic than the Trijicon RMR! PROCEED WITH CAUTION! DAMAGE TO YOUR RECEIVER COULD OCCUR.
Looking for other American Made GG&G Mossberg 990 Shotgun Accessories? Find Them Here!
Mossberg 990 RMR Scope Mount
The Mossberg 990 Shotgun is a hot new addition to the Mossberg shotgun lineup. More and more, shotguns are being equipped with Red Dot Optics like the Trijicon RMR. Red Dot Optics are an extremely popular tactical accessory for Mossberg shotguns. The GG&G Mossberg 990 Low Profile Red Dot Optic Mount has the RMR fitment or attachment layout. However, the 990 Red Dot Scope Base fits approximately 20 other red dot optics, but beware of screw lengths. The mounting hardware supplied in this package is only tested to fit the Trijicon RMR optic.
The Mossberg 990 Red Dot Mount is a rock solid low profile mount. It is CNC machined to precise tolerance and has incredibly solid engagement with the top of the 990 receiver and with the red dot optic. The Red Dot Scope Mount, coupled with the RMR Red Dot Scope, provides a rugged and accurate quick target acquisition package.
Mossberg 990 RMR Scope Mount Specifications:
- Does not require any modifications to your Mossberg 990.
- The Mossberg 990 Red Dot Scope Mount is easy to install using factory drilled and tapped mounting holes.
- Includes mounting hardware for the 990 Scope Mount and hardware specifically for mounting the Trijicon RMR to the scope mount.
- Hex key wrenches are included.
- The Mossberg Red Dot Scope base fits several other red dot optics but beware of screw lengths. The mounting hardware supplied in this package is only tested to fit the Trijicon RMR optic.
- Red Dot Fitment List: Trijicon RMR / Trijicon SRO / Holosun 407C / Holosun 407C V2 / Holosun 407C X2 / Holosun 507C / Holosun 507C V2 / Holosun 507C X2 / Holosun 508T / Holosun 508T X2 /Riton X3 Tactix PRD/ NcStar VISM FlipDot Pro / ADE Advanced Optics RD3-020 Raptor / ADE Advanced Optics RD3-023 Valkyrie / Swampox Kingslayer 1x22 / Swampfox Liberty RMR 1x22 / Swampfox Justice RMR 1x27 / Vector Optics Frenzy 1x22x26.
- All edges are deburred for the shooter's safety.
- Rounded edges provide a snag free operation.
- Material: The Mossberg 990 Red Dot Scope Mount is manufactured from 6061-T6 aluminum.
- Length: 1.800"
- Width: 1.100"
- Thickness: 2.10"
- Body Finish: Matte black Type III hard coat anodized per Mil-Spec. to protect it from the elements.
- Weight: 0.5 oz.
- Warranty: Lifetime.
- Made in America By Men And Women Proud To Be Americans!
This GG&G Low Profile Red Dot Mount was Designed, Manufactured and Tested Specifically For The Mossberg 990 Shotgun.
This Scope Base Fits The RMR and approximately 20 Other Red Dot Optics With A Similar Footprint.
Be Advised! Attachment Screw Lengths Vary. Longer screws may damage the top of your shotgun!
Looking for other American Made GG&G Mossberg 990 Shotgun Accessories? Find Them Here!
Mossberg 990 RMR Scope Mount
The Mossberg 990 Shotgun is a hot new addition to the Mossberg shotgun lineup. More and more, shotguns are being equipped with Red Dot Optics like the Trijicon RMR. Red Dot Optics are an extremely popular tactical accessory for Mossberg shotguns. The GG&G Mossberg 990 Low Profile Red Dot Optic Mount has the RMR fitment or attachment layout. However, the 990 Red Dot Scope Base fits approximately 20 other red dot optics, but beware of screw lengths. The mounting hardware supplied in this package is only tested to fit the Trijicon RMR optic.
The Mossberg 990 Red Dot Mount is a rock solid low profile mount. It is CNC machined to precise tolerance and has incredibly solid engagement with the top of the 990 receiver and with the red dot optic. The Red Dot Scope Mount, coupled with the RMR Red Dot Scope, provides a rugged and accurate quick target acquisition package.
Mossberg 990 RMR Scope Mount Specifications:
- Does not require any modifications to your Mossberg 990.
- The Mossberg 990 Red Dot Scope Mount is easy to install using factory drilled and tapped mounting holes.
- Includes mounting hardware for the 990 Scope Mount and hardware specifically for mounting the Trijicon RMR to the scope mount.
- Hex key wrenches are included.
- The Mossberg Red Dot Scope base fits several other red dot optics but beware of screw lengths. The mounting hardware supplied in this package is only tested to fit the Trijicon RMR optic.
- Red Dot Fitment List: Trijicon RMR / Trijicon SRO / Holosun 407C / Holosun 407C V2 / Holosun 407C X2 / Holosun 507C / Holosun 507C V2 / Holosun 507C X2 / Holosun 508T / Holosun 508T X2 /Riton X3 Tactix PRD/ NcStar VISM FlipDot Pro / ADE Advanced Optics RD3-020 Raptor / ADE Advanced Optics RD3-023 Valkyrie / Swampox Kingslayer 1x22 / Swampfox Liberty RMR 1x22 / Swampfox Justice RMR 1x27 / Vector Optics Frenzy 1x22x26.
- All edges are deburred for the shooter's safety.
- Rounded edges provide a snag free operation.
- Material: The Mossberg 990 Red Dot Scope Mount is manufactured from 6061-T6 aluminum.
- Length: 1.800"
- Width: 1.100"
- Thickness: 2.10"
- Body Finish: Matte black Type III hard coat anodized per Mil-Spec. to protect it from the elements.
- Weight: 0.5 oz.
- Warranty: Lifetime.
- Made in America By Men And Women Proud To Be Americans!
This GG&G Low Profile Red Dot Mount was Designed, Manufactured and Tested Specifically For The Mossberg 990 Shotgun.
This Scope Base Fits The RMR and approximately 20 Other Red Dot Optics With A Similar Footprint.
Be Advised! Attachment Screw Lengths Vary. Longer screws may damage the top of your shotgun!
- GG&G, 3602 E. 42nd Stravenue, Tucson, Arizona 85713
- Call Us Now : 800-380-2540
- Email: sales@gggaz.com
