Made in America - Deployed Worldwide - GGG Made in America - Deployed Worldwide - GGG
CART
CART
LE/Mil Discounts AvailableLE/MIL
DISCOUNTS AVAILABLE
WE DON'T CHARGE UNTIL THE DAY WE SHIPWE DON'T CHARGE UNTIL
THE DAY WE SHIP
CALL US TOLL FREE CALL US TOLL FREE
(800) 380-2540
EMAIL US info@gggaz.com EMAIL US
info@gggaz.com

Benelli M4 Red Dot Scope Mount - Burris FastFire 3 and 4 Footprint

Benelli M4 FastFire Red Dot Scope Mount
Write a review
Benelli M4 Red Dot Scope Mount- FastFire 3 and 4 Footprintv
$35.95
GGG-2963
In stock
+ −

IMPORTANT NOTICE! Although we include mounting screws for the Burris FastFire 3 and FastFire 4 red dot optics, there are approximately 5 other Micro Red Dot Optics that fit this GG&G Benelli M4 Red Dot Scope Mount. A fitment list is provided in the Specification section below.

Please be advised that the screws that are included with this GG&G Red Dot Mount are specific to mounting the FastFire 3 and 4 and may be too long for mounting other red dot optics. If you attempt to mount any of the optics listed below or others not specifically listed without verifying screw lengths, you may dimple the top of the receiver!

Ensure you have the proper length screws prior to installing any other optic than the Burris FastFire 3 and FastFire4!  PROCEED WITH CAUTION! DAMAGE TO YOUR RECEIVER COULD OCCUR.

Looking for other American Made GG&G Benelli M4 Shotgun Accessories?  Find Them Here!

Benelli M4 Red Dot Scope Mount-Burris FastFire Footprint

The Burris FastFire 3 and FastFire 4 mini red dots are super popular as a quick target acquisition setup for shotguns. This GG&G Benelli M4 Red Dot Optic Mount has the fitment or attachment layout of the Burris FastFire 3 and FastFire 4 Red Dot Optic. Please keep in mind that many red dot manufacturers use the same footprint layout. That's why the GG&G Benelli M4 Low Profile Red Dot Scope Base fits approximately five other red dot optics but please beware of screw lengths. The mounting hardware supplied in this package is only tested to fit the FastFire 3 and 4 optics.

The M4 Red Dot Mount is low profile and a solid red dot mount for the Benelli M4 Shotgun. CNC machined to precise tolerance, insures a rock solid engagement with the top of the Benelli M4 receiver and the red dot scope. The M4 is positioned to allow true center co-witnessing with the factory sights. The Benelli M4 Red Dot Scope Mount coupled with either the Burris FastFire 3 or FastFire 4 Red Dot Scope or any of the red dots having the same footprint, provide a rugged and accurate quick target acquisition package.
 

Benelli M4 Red Dot Scope Mount With Burris FastFire Footprint Specifications:

  • Does not require any permanent modifications to your Benelli M4 Shotgun except removal of the standard dovetail scope mount if equipped with one.
  • The M4 Red Dot Scope Mount For FastFire's is easy to install using factory drilled and tapped mounting holes.
  • Includes mounting hardware for mounting the FastFire 3 and 4 Scope Mount to the Benelli receiver and hardware specifically for mounting the Burris FastFire 3 and 4 to the scope mount.  The hardware package also includes three slotted set screws to fill the vacated threaded holes after removing the factory scope rail.
  • Hex key wrenches are included.
  • The M4 Red Dot Scope FastFire base fits several other red dot optics but beware of screw lengths. The mounting hardware supplied in this package is only tested to fit the Burris FastFire 3 and 4 optics.
  • Red Dot Fitment List: Primary Arms SLX RS-10, SightMark Mini Shot M-Spec and Mini Shot Pro Spec, Vortex Venom, Vortex Viper.
  • All edges are deburred for the shooter's safety.
  • Rounded edges provide a snag free operation.
  • Material: The Benelli M4 Red Dot Scope Mount is manufactured from 6061-T6 aluminum.
  • Length: 1.965".
  • Width:  1".
  • Thickness: .250".
  • Body Finish: Matte black Type III hard coat anodized per Mil-Spec to protect it from the elements.
  • Weight: 0.5 oz.
  • Warranty: Lifetime.
  • Made in America By Men And Women Proud To Be Americans!

 

GG&G American Made

 

Designed, Manufactured and Tested By GG&G For The Benelli M4 12ga Shotgun.

This Scope Base Fits The Burris FastFire 3 and 4 and approximately 5 Other Red Dot Optics With a Similar Footprint.

Be Advised!  Attachment Screw Lengths Vary From Red Dot Scope To Scope. Longer screws may damage the top of your shotgun!

 

Looking for other American Made GG&G Benelli M4 Shotgun Accessories?  Find Them Here!

Benelli M4 Red Dot Scope Mount-Burris FastFire Footprint

The Burris FastFire 3 and FastFire 4 mini red dots are super popular as a quick target acquisition setup for shotguns. This GG&G Benelli M4 Red Dot Optic Mount has the fitment or attachment layout of the Burris FastFire 3 and FastFire 4 Red Dot Optic. Please keep in mind that many red dot manufacturers use the same footprint layout. That's why the GG&G Benelli M4 Low Profile Red Dot Scope Base fits approximately five other red dot optics but please beware of screw lengths. The mounting hardware supplied in this package is only tested to fit the FastFire 3 and 4 optics.

The M4 Red Dot Mount is low profile and a solid red dot mount for the Benelli M4 Shotgun. CNC machined to precise tolerance, insures a rock solid engagement with the top of the Benelli M4 receiver and the red dot scope. The M4 is positioned to allow true center co-witnessing with the factory sights. The Benelli M4 Red Dot Scope Mount coupled with either the Burris FastFire 3 or FastFire 4 Red Dot Scope or any of the red dots having the same footprint, provide a rugged and accurate quick target acquisition package.
 

Benelli M4 Red Dot Scope Mount With Burris FastFire Footprint Specifications:

  • Does not require any permanent modifications to your Benelli M4 Shotgun except removal of the standard dovetail scope mount if equipped with one.
  • The M4 Red Dot Scope Mount For FastFire's is easy to install using factory drilled and tapped mounting holes.
  • Includes mounting hardware for mounting the FastFire 3 and 4 Scope Mount to the Benelli receiver and hardware specifically for mounting the Burris FastFire 3 and 4 to the scope mount.  The hardware package also includes three slotted set screws to fill the vacated threaded holes after removing the factory scope rail.
  • Hex key wrenches are included.
  • The M4 Red Dot Scope FastFire base fits several other red dot optics but beware of screw lengths. The mounting hardware supplied in this package is only tested to fit the Burris FastFire 3 and 4 optics.
  • Red Dot Fitment List: Primary Arms SLX RS-10, SightMark Mini Shot M-Spec and Mini Shot Pro Spec, Vortex Venom, Vortex Viper.
  • All edges are deburred for the shooter's safety.
  • Rounded edges provide a snag free operation.
  • Material: The Benelli M4 Red Dot Scope Mount is manufactured from 6061-T6 aluminum.
  • Length: 1.965".
  • Width:  1".
  • Thickness: .250".
  • Body Finish: Matte black Type III hard coat anodized per Mil-Spec to protect it from the elements.
  • Weight: 0.5 oz.
  • Warranty: Lifetime.
  • Made in America By Men And Women Proud To Be Americans!

 

GG&G American Made

 

Designed, Manufactured and Tested By GG&G For The Benelli M4 12ga Shotgun.

This Scope Base Fits The Burris FastFire 3 and 4 and approximately 5 Other Red Dot Optics With a Similar Footprint.

Be Advised!  Attachment Screw Lengths Vary From Red Dot Scope To Scope. Longer screws may damage the top of your shotgun!

 

Age Verification

You must be over age 21 to view this content

Verification Side Image